For every large energy storage unit,
leave the factory with complete status and evidence
Through lifting assessment, transport-unit confirmation, packaging and accessory closure, container and vehicle checks, lashing verification, identity chain, seals, and complete shipping documents, confirm safety, status, and responsibility boundaries before equipment leaves the plant.
Loading does not mean that it can be shipped, but only after all boundaries are closed can Gate-Out.
IDSystems match packaging5 / 5
VEHVehicle distribution5 / 5
SEALTitle and Identification5 / 5
LIFTHanging capacity surplus31%
LOADReinforcement Check24 / 24
HOLDHOLD not closed0
01
One shipment, comprising five transport units
01
Battery chamberBATTERY ENCLOSUREBE-01
Dimensions: 6058 x 2438 x 2896 mm
Weight: 18,700 kg
02
Battery chamberBATTERY ENCLOSUREBE-02
Dimensions: 6058 x 2438 x 2896 mm
Weight: 16,700 kg
03
Battery chamberBATTERY ENCLOSUREBE-03
Dimensions: 6058 x 2438 x 2896 mm
Weight: 18,700 kg
04
PCS / DCPCS/DC ASSEMBLYPC-01
Dimensions: 6058 x 2438 x 2896 mm
Weight: 15,600 kg
05
Support moduleCONTROL & AUXPC-01
Dimensions: 2991 x 2438 x 2896 mm
Weight: 8,200 kg
Transport unit 01:
BE-01 Battery module, size 6058 x 2438 x 2896mm, weighing 18,700 kg, has been packaged, station and transport boundary confirmation.
ACCParts and accessoriesAccessories & Materials
DOCFile bagsDocument Pouch
40HContainer distribution40HQ × 2
TRKVehicle distributionPrime Mover × 2
SEQLoad Order01 → 02 → 03 → 04 → 05
02
Every suspension of 18.5 tons of equipment must be licensed to the border
Device Weight18,700 kg
Number of posts4
Max.≤60°
Plasma capacity32,000 kg
Gravity of cranes50,000 kg
Hanging capacity surplus31%
ZONERisk areaRadius R ≥ 8 m
ORIHanging direction.Active
WXWeather conditionsWind speed 8 m/s
CREWOperatorsLicensed on duty.
PERMITPermission WindowValid period controlled
Loading of a vehicle does not amount to a transportable state
Horizontal Block
Blocking / Lateral
Sliding pads
Anti-slip Mats
Tie up.
Lashing Straps
Load Point
24 / 24
Containers40HQ × 2
Total quality94,800 kg
Axis Load DistributionVerified
Focus of goodsWithin Boundary
Load Support Point24 / 24 VERIFIED
04
Container and vehicle arrival check
Container status
Box number match ✓
40HQ model ✓
Dry / Clean ✓
Box door complete. ✓
Floor Status ✓
No structural damage ✓
Vehicle status
License Match ✓
Tractor status ✓
Tyre / Light ✓
Full frame. ✓
Driver status ✓
Permission valid. ✓
Quality records
Empty Weight ✓
Total mass after loading ✓
Axis Load Value ✓
Maximum allowable load ✓
Heavy Time ✓
Recorder ✓
Tie and fix.
Ties match. ✓
Other Organiser ✓
Slipper state ✓
Focus Position ✓
Door gap check ✓
Final review ✓
05
Equipment, packaging, vehicles, box numbers and seals must form the same chain of identity
System ID
TC-BESS-5MWh-R03-01
System Identity
Five transport units
5 / 5 MATCHED
Containers / Vehicles
TCLU 6623456
Vehicle / Container
Title number
S-872541
Seal Identity
Shipping records
TC-DEMO-SHP-2608-006
5 / 5 VERIFIED
System Identity:
All shipping and shipping objects must trace back to the only System ID to avoid separation of equipment from the project status.
06
Controlled anomalies: release of seals
Any failure to pass is Hold
Anomalous discovery.
The actual seal number was not consistent with Dispatch Record ' s pre-allocation number.
HOLD
System Freeze
Gate-Out, car number, system shipment Release is automatically frozen.
RELEASE BLOCKED
Correction and review
Replace the correct seal and re-scan box number, Seal ID and vehicle information.
RE-VERIFY
Unusual Close
The QA review closed the anomaly and restored the Gate-Out decision-making chain.
CLOSED
Final confirmation of transport status before we leave.
08
Documentation and transport chain of evidence
PKG
Box listPacking List
CURRENT REV.
DSP
Notification of shipmentDispatch Note
CURRENT REV.
TRP
Transport plansTransport Plan
CURRENT REV.
PER
Route / Transport PermitRoute Permit
REV.01
DC
Dangerous goods informationDC Information
REV.01
SOS
Emergency contact detailsEmergency Contacts
REV.01
CCR
Container status reportCondition Report
REV.01
CAR
Carrier hand-overCarrier Handover
REV.01
Box list:
Packing List identifies transport units, packagings, accessories, quantities and System IDs.
09
Decision-making: state-by-state release
Either does not pass immediate HOLD
PSPackaging ReleasePackaging Release
LPLoad PermitLoading Permit
LVHang / Load VerificationLift / Load Verified
SVReinforce confirmationSecuring Verified
IDOrganisationShipment Identity
2PDual AuthorizationDual Approval
GOGate-OutGate Release
RECDelivery recordsDelivery Record
Not Match / Abnormal
HOLD
• System freeze, correction and review, re-entry into decision Gate
10
It's a time axis for the whole trip.
Project delivery
